Giardini Safety Line

Lining

Category:

Description

Safety Line

Since the end of 90s Giardini has been specializing in specific products intended for safety footwear. It is therefore able to offer a very wide range of items designed for this type of use.
All materials have been certified according to the European Community standards EN ISO 20345: 2011 / EN ISO 20346: 2004 / EN ISO 20347: 2012. The very
high technical characteristics place our products at the top of the market quality:

  • Breathability
  • Waterproofing, with treatments without PFOA / PFOS
  • Washable at 30 60 90 also in an autoclave
  • Special finishes for direct PU sole injection
  • Flame retardant treatment
  • Suitable for digital and high-frequency screen printing.

upper materialUPPER

The materials for the upper stand out for the high mechanical and physical
characteristics that guarantee performances well above the international standards for safety footwear. The range includes microfiber and coagulated polyurethane products. The
thicknesses range from 1.6 to 2.2 mm with the wide availability of colors and textures. All materials can be S1 and/or S2 and are compatible with the direct injection processes of the polyurethane sole.

 

 

 

 

0021 FODERA

 

LINING

The products for lining and upper reinforcement are all highly: breathable and absorbent, resistant to abrasion (dry and wet), and tearing.
On request, they can have an antistatic and antibacterial treatment.

 

 

 

 

 

upper

 

 

APPLICATIONS(UYGULAMALAR):

The range of articles for upper applications is very wide and includes:

REFLEX(REFLEKS)MALZEMELERI:

DECOLINE: Teknik kumaşlara uygulama için PU film

ve gerçek deri kullanmaktadır.

            • Techno grain materials: suitable for toe and heel / outer edge protection with high abrasion resistance.
      • Reflex materials
  • DecoLine: PU film for application on technical fabrics and real leather.

 

Mycro hattı

Microfibers with stunning technical characteristics. Since the 1990s, Giardini has developed the Mycro Line, becoming an important reference worldwide in this field. Mycro today represents the most advanced and performing material for technical / sports footwear, clothing, and leather goods.

Some good reasons for choosing:

  • Very high mechanical characteristics
  • Lightweight for higher comfort
  • Easy processing
  • Breathability, some of these items comply with GORE requirements
  • Waterproofing, with treatments without PFOA / PFOS
  • Resistance to aging

 

With the experience gained over the years, Giardini has studied special finishes so that Mycro can be used in the most different markets: for example, finishes for direct injection of PU soles, easy clean antibacterial, antistatic, flame retardant treatment; also suitable for digital and high-frequency screen printing.

  

Microfibre suede for safety and sport

  • high breathability
  • mechanical strength

 

Giardini also guarantees the possibility of different types of treatments, such as:

water repellency, softener, application of heat adhesive, and antibacterial.

COATED MYCROFIBERS FOR SAFETY AND SPORT SYSTEM

 

Coated mycrofibers for safety and sport system

 

The products of the sport range have been developed following the continuous comparison with specialists in the cycle, motorcycle, football, trekking, outdoor and leisure sectors. This has led to the continuous improvement of the technical performance of the articles and research and development of innovative materials. The articles range from 0.5 mm to 4.0 mm thickness and are all characterized by Very high mechanical strength and on request water repellent treatment and breathable polyurethanes. The materials for safety upper, on the other hand, guarantee performance far superior to the most recent international standards for safety footwear.

(EN ISO 20345: 2011 / EN ISO 20346: 2004 / EN ISO 20347: 2012)

The range is very extensive and all materials can be S1 and/or S2 and are compatible with the direct injection processes of the polyurethane sole.